48孔匹克球是否符合比賽規範?(USAP規則與因應對策)

匹克球設備公司(Art Pickleball)執行長兼技術專家
專注於製造匹克球拍、匹克球及匹克球配件。

如果你見過48孔的「專業級」匹克球,並懷疑它們是否符合比賽規範,你並不孤單。
這種困惑源於一個簡單的事實。
「比賽合法」在不同賽事中並不完全相同。
以下是一個清晰的思考方式。
快速解答
對於美國匹克球協會(USAP)認可的比賽,球必須符合USAP設備標準,該標準規定球應有26至40個圓形孔洞。
因此,根據這些規格,48孔的球不符合USAP認可比賽的資格。
對於非認可的錦標賽、聯賽及許多私人賽事,主辦方可以自行設定球的使用政策。
一些知名賽事已公開採用48孔的球作為官方用球。
在這些情況下,48孔的球是被允許的,因為該賽事不遵循USAP的認可設備要求。
現在讓我們把這點變得實用。
USAP實際要求是什麼(以及為何孔數很重要)
USAP的設備標準手冊定義了用於認證的球類要求。
在「設計」部分,USAP規定球必須至少有26個、最多40個圓形孔洞。
USAP的官方規則書引導你參考該標準手冊以進行球設計認證,並描述了通用構造要求(耐用模壓材料、光滑表面、允許接縫脊線,前提是不顯著影響飛行)。
用白話來說:
- 如果賽事是USAP認可的,則預期會使用符合這些標準的USAP認證球。
- 48孔的設計無法滿足「26–40個孔洞」的要求,因此根據現行標準,它無法獲得認證。
For a quick breakdown of 26 vs 40 vs 48 hole counts, see Pickleball Ball Hole Count Rules.
為何仍可在「比賽」環境中看到48孔球
Not every tournament is USAP sanctioned.
In practice, you will see at least three buckets of events:
USAP-sanctioned tournaments
These are the most strict About using approved equipment standards.
If your event is sanctioned, assume a 48-hole ball is not permitted, unless the organiser states otherwise and can reconcile it with the sanctioned equipment policy.
專業版 tours, private circuits, and organiser-defined events
Some organiser-run series set their own ball policy.
A major professional tour has publicly announced a 48-hole ball as its exclusive event ball for its tournaments and events.
If you want to understand why some players prefer 48-hole balls for stability and speed, read What Makes a 48 Holes Pickleball Ball Different.
That is a strong signal that “tournament ball” can be a tour policy, not a USAP approval statement.
Clubs, facilities, and local leagues
Many leagues simply choose “the ball we all use here” for consistency, durability, and availability.
This is where 48-hole 匹克球 often show up, especially when players want a faster, more stable outdoor flight.
60秒檢查清單:如何判斷48孔球是否可用於您的賽事
When you’re deciding whether a 48-hole ball is acceptable, don’t guess.
Ask these questions.
1. Is the event USA Pickleball sanctioned?
- If yes, start from the assumption that the ball must align with USAP equipment standards.
2. Does the event publish a specific ball model?
- Many organisers name the exact model to avoid disputes.
3. Does the organiser require a “USA Pickleball Approved” ball?
- USAP’s standards manual references “USA Pickleball Approved” marking/seal expectations (often on packaging, and in some contexts on the ball or packaging).
4. If it’s not sanctioned, what’s the written ball policy?
- If it’s an organiser-defined event, their rules override informal assumptions.
If you can’t get a clear answer, treat it like this:
- 經認可或「僅限 USAP 核准」→ 選擇符合規定的 26–40 孔球。
- 未經認可/由主辦單位定義 → 遵循主辦單位選擇的型號,即使是 48 孔球。
如果您是制定用球政策的俱樂部或場館,該怎麼做
如果您管理球場、聯賽或場館商店,您的目標很簡單。
避免球員爭論。
避免在報到時出現「驚喜」。
使用類似下列其中一項的政策:
選項 1:符合 USAP 的政策(最簡單)
我們在所有聯賽和錦標賽中使用符合 USA Pickleball 設備標準的球。
這與 USAP 標準中規定的 26–40 孔要求保持一致。
選項 2:雙層政策(聯賽 vs 公開賽)
聯賽比賽使用公布的比賽用球。
公開賽允許使用雙方同意的任何球。
這能終結無止境的「這合法嗎?」爭論。
選項 3:基於表現的政策(主辦單位定義的賽事)
對於此賽事,我們使用 Ball X 作為官方用球。
球員必須在所有比賽中使用賽事用球。
這實際上就是許多由主辦單位定義的錦標賽的運作方式。
48孔「專業」球最適合的應用場景(不違反規則風險)
購買 48 孔球通常是基於以下原因之一:
- 您希望在優質的戶外比賽中獲得一致且穩定的飛行。
- 您希望獲得快速手感與真實彈跳,以符合某些更高層級的環境。
- 您正在運營一個將性能一致性置於標準認可標籤之上的私人聯賽。
如果您正在建立自有品牌產品線,比網路爭論更重要的是:
- 您能否在量產規模下持續保持直徑公差、重量公差和圓度控制?
- 工廠能否在可重複的 QC 流程中向您展示硬度、彈跳和壓縮測試?
這正是為什麼我們的 Pro 48 孔球頁面包含了完整的規格表(74 ± 0.5 mm,26 ± 0.3 g,Shore D 58,雙色射出成型,改性 TPE)以及針對 OEM 買家的生產/QC 定位。
如果您想查看規格或索取樣品,請從此處開始: Pro 48 孔匹克球(OEM 規格與報價).
常見問題
Q1. 48 孔匹克球是否獲得 USAP 核准?
根據 USAP 現行的設備標準,球體設計要求指定為 26–40 個圓孔,因此 48 孔設計不符合該要求。
Q2. Can a 48-hole ball be used in a tournament?
Yes, if the event is organiser-defined (not USAP sanctioned) and the tournament rules allow it. Some major events have publicly selected a 48-hole ball as their official ball.
Q3. How do I know if my tournament is USAP sanctioned?
Check the event listing, tournament 頁面, or ask the tournament director directly.
If it’s sanctioned, the event is expected to follow USAP equipment standards.
Q4. What should brands ask an OEM factory before launching a “專業版” ball?
Ask for tolerance targets (diameter/weight), QC testing (hardness, bounce, compression), defect control (out-of-round, seam consistency), and sample validation before mass production.

